Install or replace
Supplementary wood stove in Brussels: what to check with your insurer and your commune
Installing a wood stove to supplement your central heating might seem like a minor change, but it can affect your fire insurance policy and sometimes requires a step with your commune. Here's what DPS Chauffagiste recommends checking before installation.
By DPS Chauffagiste · Published on 10 November 2026 · 7 min read
This article was translated from French.
In recent years, many Brussels households have had a wood stove fitted to supplement their gas or heating oil boiler, either to cut their energy bill or simply to enjoy the pleasant warmth of a wood fire. It's a perfectly reasonable choice, but it comes with administrative steps that are all too often overlooked: notifying your insurer and, depending on the situation, checking local council rules before installation. At DPS Chauffagiste, we regularly meet customers who are surprised to learn that a stove installed several years ago was never reported anywhere — which can become a real problem the day a claim arises.
Why a wood stove changes your risk profile
A fire insurance policy is based on a description of your home and its heating installations at the time you take out the contract. In the eyes of your insurer, adding a wood stove constitutes an increase in risk: an additional combustion appliance, a flue that sometimes runs through several floors, and a heat source that operates differently from a conventional boiler.
Most home insurance policies impose a duty to declare any substantial change to the insured risk. Failing to report the installation of a wood stove doesn't automatically void your contract, but it can have very real consequences if a claim is linked, even loosely, to that appliance: a reduced payout, or even a refusal of cover if the insurer considers that the information would have changed the terms of the contract or the premium. This type of clause is usually found in the general terms and conditions, under a heading such as "aggravation of risk" or "declaration of new circumstances".
The sensible approach remains simple: contact your insurer before installation, or at the latest just after the work is done, to inform them of the new appliance. In the vast majority of cases, this does not lead to a significant increase in premium, but it does secure your cover.
What your insurer will ask for
When you report the installation of a wood stove, your insurer will generally want to check three things:
Compliance of the appliance and the installation
The stove must meet the applicable standards for wood-burning heating appliances (CE marking, compliance with the air quality requirements in force in the Brussels Region). The installation itself — safety clearances from combustible materials, a fire-resistant floor plate, connection to the flue — must follow good practice, notably as set out in the Belgian standard governing individual heating appliances.
A certificate of compliance or inspection
Some insurers ask for a certificate issued by the installer or by a chimney sweep, confirming that the appliance and flue were fitted and inspected according to the rules. This document isn't always required when you take out the policy, but it becomes invaluable in the event of a claim: it shows that the installation was compliant and that nothing was neglected on your part.
Regular maintenance of the flue
A chimney flue used for a wood stove must be swept at least once a year, more often if used intensively. Keep your sweeping invoices and certificates carefully: they serve as proof of maintenance that your insurer may request in the event of a claim, particularly in the case of a chimney fire or damage caused by a clogged flue.
The chimney flue: a particular point of attention
This is often where most misunderstandings arise. Two situations can occur:
You are using an existing chimney flue, for example an old open-fire chimney found in many Brussels houses. This flue almost always needs to be lined with a stainless steel liner suited to the wood stove, as an old flue is generally not sized or sealed correctly for this type of appliance. A professional must assess the condition of the flue before any installation.
You are creating a new flue, for example a roof or facade outlet for a stove installed in a room that didn't previously have one. This modification affects the structure of the building and, depending on its scale and visibility from the street, may require a building permit or a declaration to your commune.
In both cases, a flue that is incorrectly sized, unlined or poorly maintained represents a well-documented fire risk factor. This is precisely the kind of element that an insurance assessor will examine as a priority in the event of a claim.
Local and planning rules in Brussels
In Brussels, installing a wood stove doesn't systematically require a building permit, but certain situations may fall under this requirement:
- creating a new roof outlet or a new flue on a facade visible from public space;
- altering the external appearance of the building, particularly if your property lies within a protected area or has heritage value;
- certain specific local council regulations, notably regarding air quality or neighbourhood nuisance linked to smoke.
Rules vary from one commune to another and change over time, particularly regarding indoor and outdoor air quality. We always recommend checking the situation with your commune's planning department (service urbanisme) or on urban.brussels before starting any work that alters an existing flue or creates a new one. This check generally takes little time and avoids much bigger complications if undeclared work has to be regularised afterwards, or if a neighbour complains about a nuisance linked to smoke.
A direct link between compliance, insurance and safety
These administrative steps are not mere paperwork: they are closely tied to the safety of your home. A poorly installed stove, an unsuitable flue or neglected maintenance genuinely increase the risk of a chimney fire or smoke backflow, with a risk of carbon monoxide poisoning if the evacuation of fumes is compromised. This is precisely why insurance, local council rules and technical standards all converge on the same requirements: a compliant appliance, a suitable flue, regular maintenance.
On the legal side, it's worth remembering that annual servicing remains a legal obligation for heating appliances using a fuel, and this obligation applies, in a similar way, to wood stove flues through regular chimney sweeping. Keeping a written record of this maintenance protects both your safety and your insurance cover.
DPS Chauffagiste's role before and after installation
When we carry out the installation of a wood stove or the lining of an existing flue, we systematically check:
- the condition of the existing flue and whether lining is required;
- the safety clearances from combustible materials in the room;
- the compliance of the installation with current standards;
- whether, depending on your situation, you need to consult your commune before starting work.
Once the work is complete, we can provide you with the documents needed to certify the compliance of the installation, which you can pass on to your insurer if requested. We also offer follow-up through an annual maintenance contract, which guarantees you a sweeping and inspection certificate every year — a document well worth keeping in your insurance file.
Our recommendations before you order your stove
If you're considering installing a supplementary wood stove in Brussels, here are the steps we recommend, in order:
- Check with your commune whether the type of flue you're planning requires a declaration or a building permit.
- Have the condition of the existing flue assessed by a professional before buying the appliance, to anticipate any lining that may be needed.
- Contact your insurer to inform them of the project and find out which documents they want once the installation is complete.
- Have the installation carried out by a professional who can issue you a certificate of compliance.
- Schedule an annual flue maintenance visit and keep every sweeping certificate.
These few checks, carried out before installation, spare you a great deal of hassle in the event of a claim and, above all, ensure your installation runs more safely on a day-to-day basis. Our team remains available to assess your existing flue, carry out any necessary lining, or simply answer your questions before you start this project.
Further reading
Replacing a boiler in a Brussels flat with no lift: what it means for the job
Many rental buildings in Brussels have no lift. We explain why this detail genuinely changes the organisation, the timeline and sometimes even the choice of equipment when replacing a boiler in a flat.
18 November 2026 · 7 min read
Install or replaceGeothermal Heat Pumps in Brussels: Why They Remain Rare in Dense Urban Housing
Geothermal energy is appealing for its performance, but Brussels' subsoil and cramped plots make it seriously difficult to implement. We explain why the air-to-water heat pump often remains the most realistic alternative in the city.
30 October 2026 · 6 min read
Install or replaceHeat pump: monobloc or bibloc in Brussels? Key differences explained
Monobloc or bibloc, the two types of air-to-water heat pumps aren't equally suited to every property. In Brussels, where terraced houses, small gardens and neighbourhood rules often complicate things, choosing the right system depends as much on the technology as on the layout of the building.
29 October 2026 · 7 min read
Let's talk about your project
Tell us about your installation and we'll get back to you with a free quote.
