Skip to content

Breakdowns & repairs

Yellow or Orange Flame in Your Boiler in Brussels: A Combustion Warning Sign Not to Ignore

A flame that turns from blue to yellow or orange in your boiler is never just a cosmetic detail. We explain what this colour reveals about combustion and why you should have an approved professional check it promptly.

By DPS Chauffagiste · Published on 12 November 2026 · 7 min read

This article was translated from French.

Why the colour of the flame says a lot about your boiler

When you open the sight glass on your gas or oil boiler, you don't always think to look at the flame. Yet this small window offers valuable information about the state of combustion. A properly functioning flame has a very specific, stable colour and a regular behaviour. As soon as it changes shade, it means that something, somewhere in the combustion process, is no longer happening as it should.

In Brussels, as elsewhere, many residents notice this colour change without quite knowing whether to worry about it. Some think it's just a matter of cosmetic adjustment, others simply ignore it because the boiler continues to heat normally. This is precisely where the problem lies: imperfect combustion can coexist for a while with a heating system that appears to be working fine, before the situation deteriorates.

We take a look, without overstating things but without playing them down either, at what a yellow or orange flame means, and why this signal always warrants a prompt professional check.

What a normal combustion flame looks like

In a natural gas boiler that is working properly, the flame should be blue, clean and relatively short. It may show slight tips of other colours, but overall it remains uniform and stable, without major variations in shape or length. This blue colour is no coincidence: it results from complete combustion, that is, a chemical reaction between the gas and the oxygen in the air taking place in the right proportions.

For heating oil boilers, the flame looks slightly different since the fuel is liquid and atomised before burning. It generally shows orange-ish tints at the edges, but this remains a normal and expected feature for this type of appliance, properly managed through the burner's settings. Here, vigilance should focus mainly on the regularity of the flame, the presence of soot, unusual smells or abnormal noises, rather than on colour alone.

It is therefore mainly in gas boilers that a colour change from blue to yellow or orange serves as a direct and reliable indicator of a combustion problem.

What a yellow or orange flame means in a gas boiler

When the flame in a gas boiler turns yellow, orange, or shows tips of these colours, it most often means that combustion is no longer complete. In other words, the gas is no longer burning under proper oxygen supply conditions. Several causes can explain this phenomenon:

Insufficient combustion air

Combustion requires a sufficient and properly balanced air supply. If the air intake is blocked or poorly adjusted, or if ventilation in the room where the boiler is located is inadequate, the flame no longer receives enough oxygen to burn cleanly. It then turns yellowish or orange, sometimes accompanied by soot deposits on the walls of the burner or heat exchanger.

A build-up of dirt on the burner or heat exchanger

Over time, dust, combustion residue or deposits can accumulate on the boiler's internal components. This build-up disrupts the distribution of air and gas at the burner, which alters the shape and colour of the flame. This is one of the reasons why regular servicing remains essential: it allows these components to be cleaned before they disrupt combustion.

An appliance adjustment issue

Poor adjustment of the air-gas mixture, whether due to a previous intervention that was not properly calibrated, the wear of certain components, or a gradual drift in settings, can also cause this colour change. This type of adjustment requires specific measuring equipment and technical expertise; it is not something you can safely adjust yourself.

Disrupted flue gas extraction

If the flue is partially blocked, poorly sized or damaged, combustion gases struggle to be properly extracted. This in turn affects combustion itself and can show up as a change in flame colour, alongside other signs such as unusual condensation marks or stronger combustion odours.

Why incomplete combustion is never just a cosmetic detail

Incomplete combustion of gas doesn't just produce a less attractive-looking flame. It generates more carbon monoxide (CO), a colourless, odourless and non-irritating gas that forms precisely when gas fails to burn completely due to a lack of oxygen. This is exactly why paying attention to flame colour matters: it is one of the few visible signals of a phenomenon that is otherwise invisible and undetectable without suitable equipment.

Carbon monoxide is responsible every year for sometimes serious poisoning incidents in Belgium, often linked to poorly maintained or poorly ventilated heating appliances. This is precisely why Brussels legislation requires a compulsory periodic boiler service, including a combustion check, measurement of CO levels in the flue gases, and inspection of the entire flue system by an approved technician. This servicing is not merely an administrative formality: it allows this type of combustion drift to be detected and corrected before it becomes dangerous.

A yellow or orange flame observed between two services should therefore never be treated as a simple visual flaw to be tolerated until the next scheduled visit. It is a signal that warrants a prompt check, outside the usual schedule.

What to do if you notice this colour change

If you notice that the flame in your gas boiler has changed colour, a few simple and safe steps can be taken while waiting for a professional to intervene:

  • Ventilate the room where the boiler is located, by opening a window if possible, to encourage air circulation.
  • Never block the ventilation grilles of the boiler room or the room where the appliance is installed, even if they seem to let in cold air in winter. They are essential for safe combustion.
  • Contact an approved heating engineer to have the appliance checked, without waiting for the annual service if it is still some time away.
  • Install a certified carbon monoxide detector in your home, in addition to the servicing requirements, if you haven't already done so. This device provides extra protection in the event of a CO leak, but never replaces a professional check of combustion itself.

However, you should never attempt to dismantle the burner, adjust any settings, or clean the inside of the appliance yourself. These operations require precise technical knowledge and specific measuring equipment, and mishandling them can make the situation worse rather than better.

The role of a professional check in response to this type of signal

When responding to an abnormal flame, an approved professional usually begins by observing combustion as a whole, then carries out precise measurements of the combustion gases using an analyser. These measurements provide objective data that the eye alone cannot quantify: the carbon monoxide level, combustion efficiency, and the possible presence of other anomalies.

Depending on the causes identified, the intervention may involve simply cleaning the burner and heat exchanger, readjusting the air-gas mixture, checking the combustion air intake, or a more thorough inspection of the flue system. In some cases, this signal also reveals the general wear of the appliance, and may raise the question of replacement if the boiler is reaching the end of its service life.

This thorough diagnosis is the only way to ensure that combustion returns to safe and efficient operation, and to leave with genuine peace of mind rather than just the impression that the problem has been solved.

A simple habit to build into your routine

Beyond the compulsory annual service, getting into the habit of occasionally checking the colour of your gas boiler's flame, when it is visible, is a simple and free habit to adopt. It is not a technical inspection in itself, but an early warning indicator that can allow you to act before the situation worsens.

At DPS Chauffagiste, we respond to this type of concern across Brussels, whether as part of a scheduled service or a one-off repair following the observation of a flame that has changed colour. Our priority always remains the same: restoring safe and compliant combustion, before focusing on heating comfort. If you notice this change in your home, don't wait for other signs to appear before contacting us.

Let's talk about your project

Tell us about your installation and we'll get back to you with a free quote.